Bike-On for Mountainbike

More Views

Bike-On for Mountainbike

Be the first to review this product

Flat prevention for mountainbikes



Bike-On is a quality sealant that preventively protects against flats, specially developed for bicycles. It automatically seals punctures in your tires caused by nails, thorns, glass etc. up to a diameter of  3,5mm.



  • Easy and quick to apply

  • Contents: 2 bottles of 200 ml. (1 bottle per tire)


Availability: In stock

€19.95

Don't let a flat tire stop you!

Bike-On is a quality sealant that preventively protects against flats, specially developed for bicycles. It automatically seals punctures in your tires caused by nails, thorns, glass etc. up to a diameter of  3,5mm.

This Bike-On formula was specially developed for mountainbikes, to offer extra protection under extreme circumstances.

  • Suitable for tires sizing 26”to 29”
  • Easy and quick to apply
  • Contents: 2 bottles of 200 ml. (1 bottle per tire)

Bike-On installation instructions

You’ll need:

  • Bicycle pump
  • Scissors

 

Step 1. Turn the wheel so that the valve is in the 4 or 8 o’ clock position.

Step 2. Unscrew the valve

This will deflate the tire. Do you have a French/Presta or car valve? Use the provided tool.

Step 3. Place the hose on the valve

Step 4. Place the other end of the hose on the bottle

Unscrew the cap and remove the security sticker. Cut the tip off the bottle so the fluid can easily go through, but make sure the hose still fits.

Step 5. Squeeze the contents of the bottle into the tire

Use an entire bottle per tire.

Step 6. Screw the valve back in

Then reinflate the tire.

Step 7. Turn the wheel a few times so the product can spread

Step 8. Repeat the procedure on the other tire

Step 9. Ride your bike so the Ride-On can fully coat the insides of the tires

Step 10. Your tires are now protected!

 

Installation video

Bike-On frequently asked questions

What is Bike-On?

Bike-On is Ride-On’s special flat tire prevention formula for bicycles. A high-tech tire sealant, developed to prevent flat tires, seal punctures and lengthen tire lifespan. Different from other sealants, Ride-On is a water-based gel that doesn’t harden. The product is safe for tires and rims thanks to the corrosion inhibitors and lasts for the entire lifespan of the tire. The gel contains special aramid fibres that work with the centrifugal forces in the tire to find and repair leaks permanently.

What does Bike-On do?

Bike-On automatically seals punctures caused by nails, screws, thorns, road debris – any puncturing object up to 3 mm in diameter. Bike-On reduces the porosity of the tire and helps tires retain pressure longer.

I removed an object from my tire, but the hole won’t close. Why is that?

Bike-On contains fibres that seal the punctures. It may be that the hole is too small for the fibres to fit through. Enlarging the hole a little may help.

What happens to the Bike-On if my bicycle is stationary for a long time?

Bike-On was developed to remain attached to the insides of tire, even when it is not moving. However, after an extended period of standing still the Bike-On may pool in the bottom of the tire.   You may experiences some vibrations when you ride it again, but this will lessen as the Bike-On redistributes through the tire.

What should I do when I find an object in my tire?

Remove the object as soon as possible. Use tongs for nail or shards of glass, for a screw it’s better to unscrew it with a screwdriver to prevent further damage to the tire. Ride the bike immediately after so the Bike-On can fully seal the puncture. 

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register